Install: Flood / leak sensor

Detects water contact under sinks, water heaters, and washing machines.

Step-by-step

1. 1Pair the sensor from the panel.
2. 2Place the puck on the floor at the lowest point near the appliance.
3. 3Ensure the metal contacts face down and can touch water.
4. 4Test by briefly bridging the contacts with a wet finger.

Common mistakes

• • Placing on a shelf above the drip pan.
• • Covering with a rug.

Troubleshooting

• • No alerts: confirm the contacts are clean and free of mineral buildup.