2GIG DW10-345 Thin Door/Window Security System Contact Sensor, 3/4″ Wide Sensor, Supports Internal and External Contacts (DW10)

Description

The 2GIG DW10-345 is a compact, wireless door/window contact sensor designed to monitor the opening and closing of doors, windows, or other access points. It integrates with 2GIG security systems, providing reliable perimeter protection. Here’s an overview of its features and specifications:

Key Features:

Compact Design: Ultra-slim design (only 3/4″ wide) allows for discreet installation on doors, windows, or other entry points.

39.95 Operates on the 345 MHz frequency, compatible with 2GIG control panels and other systems using the same frequency.

Two Contact Points:

Internal Reed Switch: Triggers when the magnet is moved away.

External Contact Terminals: Allows connection to external wired sensors for additional monitoring needs.

Tamper Detection: Equipped with a tamper switch to alert the system if the sensor is removed or opened. Long Battery Life: Powered by a CR2032 coin cell battery, with an expected battery life of up to 5 years under normal use.

Easy Installation: Mounting hardware and adhesive strips are included for a quick and simple setup.

Magnet Gap: Functions reliably with a magnet gap of up to 5/8″ (16 mm) between the sensor and magnet.

LED Status Indicator: LED provides feedback during installation and operation.

Use Cases:

Doors: Monitor entry and exit points in homes or businesses.

Windows: Secure ground-floor or vulnerable windows.

Cabinets/Safes: Protect sensitive or off-limits areas.

Specifications:

Dimensions:

Sensor: 2.59″ L x 1.03″ W x 0.49″ D

Magnet: 1.3″ L x 0.435″ W x 0.312″ D Operating

Temperature: 32°F to 120°F (0°C to 49°C)

Transmission Range: Up to 350 feet in open air.

Installation Tips:

Placement: Mount the sensor on the stationary frame (door/window frame) and the magnet on the moving part (door/window). Align the marks on the sensor and magnet for proper operation.

Gap Consideration: Ensure the gap between the sensor and magnet does not exceed 5/8″ when the door or window is closed.

External Contact Setup: Use the external contact terminals to connect to wired sensors for monitoring additional zones, such as a garage door.

Testing: Test the sensor after installation to ensure proper communication with the control panel.

Compatibility: Designed for use with 2GIG control panels like the GC2, GC3, Edge, and other Alarm. com-compatible systems operating on 345 MHz.

Would you like help with installation, pairing it with a security system, or troubleshooting issues?